Welcome to our Insight blog where you will find stories and announcements that pertain to the industries Pyrotek serves, from aluminium to zinc galvanizing to glass to acoustics to battery materials and more.
Pyrotek Coatings Expert: Right Product and Application Will Protect Your Capital Investments and Improve Your Metal Quality Now
by David Cole | 30 July 2020
Choosing the correct coating and using it wisely will extend the life of a substrate, and, the better the coating, typically the more casts obtained between recoating activities.
Pyrotek Works Closely with Cometal Engineering At New Alu Menziken Casthouse in Romania
by David Cole | 15 July 2020
Convinced of Pyrotek's high-performance solutions, Cometal turns to Pyrotek for the best technology in launder systems, filtration, degassing and refining.
Pyrotek Single-Chamber Underheated Furnace Provides Advanced Technology in Smaller, Compact Size
by David Cole | 7 July 2020
“Our single-chamber furnace is smaller than the dual-chamber design, and by fitting under a casting station they don't take up additional floor space,” says Tomáš Mazálek, Foundry Furnaces Project Manager for Pyrotek’s Blansko Engineering Center.
Customers Enhance Their Process Technology with Pyrotek Advanced Control Panels
by David Cole | 17 June 2020
Pyrotek is recognized globally as a design-and-build leader of advanced control panels for electric heating systems, gas combustion systems, and other automated control systems.
Full Project Management and Engineering Services with Pyrotek
by David Cole | 9 June 2020
As manufacturers have had to reduce the number of in-house technical staff members they employ, they have grown increasingly more reliant on Pyrotek and other vendors for engineering and technical expertise.
RFM® Ladles Save Foundries from Frequent Changes, Downtime, Metal Sticking
by David Cole | 4 June 2020
Pyrotek reinforced fiberglass material (RFM®) ladles are helping foundries around the world cut way down on inclusions flowing into their finished castings, and reducing the frequency of ladle-change stoppages caused by metal sticking and wear.
Ceramite Launders – For Maximized Strength, Service Life, and Performance
by David Cole | 2 June 2020
Aluminium industry plants around the world have found they can improve their operational efficiency and increase profitability by using launders made with Pyrotek’s advanced strength Ceramite material, which is manufactured in a variety of blends for every specific application.
Precise, Safe, and Portable Heating with Pyrotek Zen Preheater Systems
by David Cole | 29 May 2020
Many aluminium foundries and casthouses around the world rely on Pyrotek’s compact and portable Zen heater units to preheat refractory parts and other operational components.
Demand More from Your Degassing Consumables with RFM® Sleeved Degassing Shafts
by David Cole | 26 May 2020
Maximizing the lifetime of graphite degassing consumables is critical to decreasing downtime and improving process efficiencies.
Pyrotek RFM Drain-Out Pump Reduces Pump Times and Maximizes Efficiency
by David Cole | 12 May 2020
Pyrotek reinforced fiberglass material (RFM®) drain-out pumps are helping world-class foundries around the world more effectively empty holding and melting furnaces.
Increasing Ladle Efficiency and Service Life Through Proper Preheating Technology
by David Cole | 4 May 2020
“It’s crucial that our customers get the highest performance from their transfer ladles and have the safest, most efficient process of preheating them,” says Mike Tomassi, Chief Engineer at Pyrotek’s Cortland, New York, USA, facility. “Our transfer ladle preheat systems help operators properly heat their vessels so they can spend more time operating and less time in maintenance.”
CASE STUDY: STAR E3500 Degassing Unit Delivers Stable Metal Density
by David Cole | 12 April 2020
Pyrotek’s STAR E3500 degassing unit with Programmable Logic Controller (PLC) is helping foundries achieve stable metal density regardless of alloy or input conditions, which is critical to a successful casting process.
Demand Grows for Pyrotek’s Advanced Filtering Technology
by David Cole | 6 April 2020
Customer savings are reaching tens of thousands to hundreds of thousands of dollars every six months.
Pyrotek Graphite Shafts and Rotors Add Value
by David Cole | 6 April 2020
“We nearly have an engineer in every customer location around the world providing experienced on-site service,” Pyrotek Product Manager Mahmud Elkhoja says.
Smart Foundry 4.0 and Your Operation
by David Cole | 6 April 2020
Adopting industry 4.0 processes can result in better quality end-products, enhanced safety for plant workers, reduced production costs, and greater energy efficiency.